User level
The
User Level
function is used to define the access authorization of the programming
functions and operating functions. It is distinguished between
programmer
and
user.
The
programmer
is authorized to program and change all parameters and functions of
the labeller, but the
operator
is not authorized to make use of all functions.
USER LEVEL
Change level
Change Password
Change level
With the
up
and
down
keys it is possible to change the levels. With the
ESC
key the
selection can be aborted or terminated:
USER LEVEL
Choice : Operator
The difference between the user levels is only active, when a password
is activated. The complete 'USER LEVEL' menu tree does not appear on
the display and is not active, if a key operated switch is installed. In this
case the authorization is accessed by the key operated switch.
Change password
This function allows to enter or change a password. The password serves to distinguish
between the user levels. Enter the password with four digits. It is not indicated as plain
text but the figures are replaced by # characters. If a password is already programmed,
this must be entered before entering a new password.
CHANGE PASSWORD
Password old : ####
When entering a new password, it has to be confirmed once again. Enter the figures
'0000'
to delete the password.
CHANGE PASSWORD
CHANGE PASSWORD
Password new : ####
Confirmation : ####
programmer/operator
STOP
User level:
Operating mode:
programmer
STOP
User level:
Operating mode:
5999.530-01B 13.08.98 WM
Page 29 /
49
