ESC key (9)
The
ESC
key is used to
abort
the input of data and to jump back to
the
previous branch
of the function tree.
UP (13) and DOWN (14) keys
These two keys are used to select a function within a function tree.
When entering
data
the indicated value can be
increased
(
up
key) or
reduced
(
down
key) with these keys.
LABELLING MODE function key
(2)
This key is used to select the
labelling mode
function. When depres-
sed, the
LED
placed above lights up and indicates that the monitor is
in labelling mode. The Collamat
®
parameters are entered in this mode.
The Figure "LABELLING MODE" menu tree (page 11) shows the
function tree of the labelling mode.
PROGRAMMING
function key (3)
This key is used to select the
programming
function. When depres-
sed, the
LED
placed above lights up and indicates that the monitor is in
programming mode. The parameters of labeller and labelling are ente-
red in the programming mode. The Figure "PROGRAMMING menu
tree" (page 14) shows the function tree of the programming mode.
CONFIGURATION function key (4)
This key is used to select the
configuration
function
.
When depres-
sed, the
LED
placed above lights up and indicates that the monitor is
in configuration mode. In this mode the Collamat
®
is adapted to the
customer's requirements. The "CONFIGURATION menu tree" (page
25) shows the function tree of the configuration mode.
SERVICE DISPLAY function key (5)
This key is used to select the
service display
function. When depres-
sed, the
LED
placed above lights up and indicates that the monitor is in
service mode. The "SERVICE FUNCTIONS menu tree" (page 30)
shows the function tree of the service mode.
ESC
5999.530-01B 13.08.98 WM
Page 9 /
49
