Information display
This function allows to indicate the most important labelling parameters on the LCD-dis-
play. The program number, the actual dispensing speed, the count and the label positi-
on on the good are shown here. It is not possible to change any data. They are only
indicated and updated. The arrangement of the information display is made in the User
Menu in the CONFIGURATION menu tree. The
ESC
label
key terminates this indication
mode:
Program 1 RUN
Speed 3.0m/Min
Counter 000000
Position 10.0 mm
Reset counter
This function allows to reset the counter to
zero. ENTER
resets the counter.
Counter cleared !
Preset counter
This function allows to activate and set the preset counter. Entering a value greater
than zero activates the preset counter. After entering return to the counter menu by de-
pressing the
ESC
key.
ENTER PRESET
Value : 123456
programmer/operator
RUN/STOP
User level:
Operating mode:
programmer/operator
RUN/STOP
User level:
Operating mode:
programmer/operator
RUN/STOP
User level:
Operating mode:
5999.530-01B 13.08.98 WM
Page 12 /
49
