Label suppression (suppression of label scanner)
This function is used to enter the length forcing the label scanner to suppress the si-
gnals from the backing paper web and the label after having detected the leading edge
of the label. Entering can be aborted by the
ESC
key. This function is used above all
when relatively transparent labels are used, for which the optical label scanner is distur-
bed by the print on the labels. This function also allows to suppress the rebounding si-
gnals of mechanical label scanners.
SUPPRESSION OF THE
LABEL SCANNER
Length : 10 mm
Predispensing
The
Predispensing
function is used to adjust the predispensing length of the label.
This length specifies the distance by which the leading edge of the label is pulled for-
ward after scanning.
PREDISPENSING
Value : 25.4 mm
If a predispensing length exceeding the label length is entered, a mal-
function of the labeller may occur because the label gap is scanned at
the wrong time. See diagram 'Predispensing' in the Technical
Appendix.
programmer
STOP
User level:
Operating mode:
programmer/operator
RUN/STOP
User level:
Operating mode:
Dispensing edge
Label
Labelscanner
Paperweb
Predispensing
5999.530-01B 13.08.98 WM
Page 18 /
49
