Select counter
This function allows to select what should be counted by the counter. The counter input
can distinguish between three different input signals:
Products (goods)
(GSC2)
Labels
(LSC)
External signal
(GSC3)
The selection can be done by the arrow key and terminated by
ESC
.
SELECT COUNTER
Choice: Products
Reset
nonstop
This function resets internal counters and monitoring states during the nonstop mode.
This function has to be called up when a fault has occurred in nonstop mode to guaran-
tee a perfect labelling of the goods. The
Nonstop Reset
is called up with
ENTER.
The
following indication confirms the execution of the reset.
Nonstop-mode
is initialized !
Note:
This function can be selected only in switched on nonstop mode.
Before starting this function, all products between both labelers must
been removed.
programmer
STOP
User level:
Operating mode:
programmer/operator
RUN/STOP
User level:
Operating mode:
5999.530-01B 13.08.98 WM
Page 13 /
49
