Entering data with the keyboard
The numerical keys of the keyboard
(10)
are used to enter data. If the value to be ente-
red is a decimal, enter the decimal point with the key
' ' (11)
.
Confirm the input with the
ENTER
key
(12)
to validate it. If the data range is exceeded,
this is indicated for a short time and the original value does not change. Now entering
can be continued. The next permissible value of the decimal place is calculated and
indicated.
The indicated data can also be increased or reduced step by step with the arrow keys
up (13)
and
down
(14).
The change of data with these keys has to be terminated by
depressing the
ESC
key
(9)
. Then the last indicated data are taken. Here takes place a
continuous control of the data range, so that unacceptable data can be avoided.
The
ESC
key
(9)
allows to abandon entering data by keyboard. Then the original value,
valid before the change will be indicated.
The
ESC
key
(9)
is used to jump back to the previous branch after having entered a
value.
All minimum and maximum values of the functions are shown in the
value tables of the Technical Appendix
.
Selecting a branch in the function tree
Use the
up (13)
and
down (14)
keys to select a branch of the function tree. With these
two keys a little cursor
(1)
can be moved up and down on the left of the LCD-display.
The line, where the cursor is positioned, points at the branch of the function tree, which
can be selected as next with the
ENTER
key
.
On the right side of the LCD-display a litt-
le direction (arrow)
(2)
informs, whether it is possible to move further up or down.
FUNCTIONTREE
1. Cursor
Functionbranch 1
Functionbranch 2
2. Direction arrows
Functionbranch 3
Not all functions can be changed in the labelling mode. In the descripti-
on of the function is noted, which one is only changeable in start or
stop state of the labeller.
Not all functions can be selected in the operating mode. In the descrip-
tion of the function is noted, which one is changeable in the operating
mode or in the programming mode.
In the value table in the Technical Appendix is shown, which modes in
the considered function are permitted.
5999.530-01B 13.08.98 WM
Page 10 /
49
