Proprietary Information: Not for use or disclosure except by written agreement with Clearfield.
74
FieldSmart
®
Fiber Active Cabinet (FAC) 900
Installation Manual
_________________________________________________________
Step 12:
Step 13:
Step 14:
Step 15:
Step 16:
Secure the FAC 900 to the mounting brackets as follows:
a.
Remove the 1/2”-13 x 1.25” hex screws loosely installed in Step 6.
b.
Slide the enclosure flush against the horizontal beams.
c.
Get (4) 1/2”-13 x 1.25” hex screws, (8) 1/2” flat washers, (8) 1/2” split lock washers, and (4) 1/2”-13 hex nuts.
d.
Install one hex screw, one flat washer and one split lock washer into each of the four mounting holes.
e.
Tighten the screws to secure the enclosure to the mounting brackets.
To secure the EXM to the mounting brackets, remove the 1/2”-13 x 1.25” hex screws loosely installed in Step
8d, and then repeat steps 12b–12e.
If you removed the door(s) previously, re-install and check the door swing alignment.
Apply silicone caulking to seal the conduit feed throughs to the base of the enclosure(s).
Once the silicone dries, use the supplied expansion foam to further seal the feed through tray inside the enclo-
sure(s).
