Clearfield FieldSmart Fiber Active Cabinet (FAC) 900 Installation Manual Download

Page: 14 / 163

Proprietary Information: Not for use or disclosure except by written agreement with Clearfield.

FieldSmart

Fiber Active Cabinet (FAC) 900

Installation Manual

_________________________________________________________

Base Cabinet Side Compartment

The base cabinet side compartment provides access to the cable entry locations, main ground bar, and fiber management

or copper line protection. For fiber access, the fiber management accessories may vary greatly according to the ordered

options. For copper access, the line protection may include up to eight 50-pair protection blocks. The side compartment

also houses an internal battery enclosure for local power configurations. The battery enclosure supports an optional battery

heater.

FAC 900 Side

(local power)

Summary of Contents for FieldSmart Fiber Active Cabinet (FAC) 900




































































































































































Search results

Summary of Contents for FieldSmart Fiber Active Cabinet (FAC) 900

Reviews:

Related manuals for FieldSmart Fiber Active Cabinet (FAC) 900

Brands by name

Popular brands

Clearfield FieldSmart Fiber Active Cabinet (FAC) 900, Installation Manual

Search results

Summary of Contents for FieldSmart Fiber Active Cabinet (FAC) 900

Reviews:

Related manuals for FieldSmart Fiber Active Cabinet (FAC) 900

Brands by name

Popular brands