Clear-Com CELLCOM 10, Instruction Manual

Page: 76 / 168

Vitec Group Communications
CellCom-10 Instruction Manual
6 - 2
individually adjusted using the two push-to-talk knobs, so that one
conversation can be monitored in the background while a primary
conversation is held.
The front-panel display contains the name (label) of the beltpack user,
identifies the two talk/listen labels currently selected by the user, and
gives other information such as signal strength and battery level.
A 4-pin male headset connector is provided for connection with a
standard Clear-Com headset or similar. The CellCom 10 beltpack will
operate for approximately 8 hours on four AA alkaline or rechargeable
NiMH batteries. Real operational times depend on usage and quality
of batteries used.
BELTPACK TOP CONTROL SECTION
Figure 6-2: View of Top of Beltpack
Talk Knobs, Channels A and B
The talk knob functions as a volume control for incoming audio
assigned to channels A and B. Turn the knob clockwise to increase the
volume, and counterclockwise to decrease it.
To talk or listen on a channel, press and hold the knob down while
speaking or listening from the headset. While the knob is held down
audio transmits on that channel. When the knob is released audio no
longer transmits.
To “latch” a knob “on” for hands-free use, quickly tap the knob. Another
quick tap releases the latch.
1
Any or all of the beltpack’s six
audio routes may be kept
open while the user talks or
listens on the beltpack.