Clear-Com CELLCOM 10, Instruction Manual

Page: 39 / 168

Vitec Group Communications
CellCom-10 Instruction Manual 4 - 1
CONNECTING THE
CELLCOM 10 BASE
STATION
The CellCom 10 base station connects to the following wired interfaces
through its rear-panel connectors:
• Base station to AC power
• Base station to party-line channels A and B
• Base station to program audio source
• Base station to stage announce output
• Base station to stage announce relay
• Base station to 4-wire matrix ports
• Base station to a second base station
• Base station to a PC
• Base station to transceiver antennas
UNDERSTANDING THE BACK-PANEL CON-
NECTORS
Figure 4-1: CellCom 10 Base Station Back Panel
POWER
PL CH-A PL CH-B PRGM IN SA OUT
SA RLY
4-WIRE / ECLIPSE PORTS
1 2 3 4
BASE
LOOP
LAN
PC PROGRAM
TRANSCEIVER
1 2
90-260V, 50/60Hz
80 Watts
1 2 3 4 5 6 7 8 9 10 11
1 Power Connector
2 Party Line Channel A Connectors
3 Party Line Channel B Connectors
4 Program Input
5 Stage Announce Output
6 Stage Announce Relay
7 4-Wire Matrix Ports
8 Base Loop Connector
9 LAN Connector
10 PC Connector
11 Transceiver Connectors
The CellCom 10 base station
connects to several wired
interfaces that can
communicate with the
wireless beltpacks.
4