Clear-Com CELLCOM 10, Instruction Manual

Page: 138 / 168

Vitec Group Communications
CellCom-10 Instruction Manual
1 0 - 1 0
SELECTING THE GROUP TO EDIT
Select which of the ten available groups is to be edited using the arrow
buttons next to the right of the label edit box.
CHANGING THE LABEL OF THE GROUP
Select the group to be changed, then over-type the text in the label edit
box.
CHANGING THE MEMBERS OF THE GROUP
A tick next to a port's label signifies that it is a member of the selected
group.
Clicking on the check box next to the label of each port toggles the
check.
ANTENNAS TAB
Due to propagation delays along the cables, antennas which are in
close proximity but which have effective cable lengths which differ by
more than approximately 150m can interfere with each other. This
screen allows the user to compensate for the length of the connection
of each of the 10 available antennas.
Figure 10-12: Antennas Tab
SYSTEM TAB
Enter the IP address to be assigned to the basestation. This address
will become effective on a map download that restarts the basestation.