Clear-Com CELLCOM 10, Instruction Manual

Page: 148 / 168

Vitec Group Communications
CellCom-10 Instruction Manual
1 1 - 8
Figure 11-10: Configuration Backup
If the communication with the base unit starts successfully, the status
text will change to “Receive in progress”, and the progress bar will
begin to advance.
If the PC is unable to communicate with the base station, after a couple
of seconds an error dialog will be displayed.
Figure 11-11: Communication Timeout
If this occurs, check that the cable is a Null Modem cable, and check
the PC and base station connections.
The reception of the configuration file should take about one and a half
minutes. After this time, a dialog box will pop up asking the user to
save the configuration file to the PC.
Figure 11-12: Saving the Configuration File