Clear-Com CELLCOM 10, Instruction Manual

Page: 65 / 168

Vitec Group Communications
CellCom-10 Instruction Manual 5 - 9
• Created names (“labels”) for communication groups and assigned
members to the each group.
The next step is to assign these communication routes to the individual
CellCom beltpacks.
For this example, communication routes are assigned to the beltpack
in position one—BPK01. The procedure is identical for all remaining
beltpacks.
To assign talk and listen routes (“labels”) to a beltpack’s keys
1. From the MAIN menu, select BELTPACKS.
The AVAILABLE BELTPACKS screen appears.
2. Select the beltpack to which the labels are to be assigned. The
PROGRAMMING OPTIONS screen appears.
3. Select KEYS. The KEY EDITING screen appears, as shown in
Figure 5-14.
Figure 5-14: Assign communication routes (“labels”) to a beltpack key
Six communications routes (“labels”) can be assigned to a CellCom
beltpack:
• Page 1 of the beltpack’s display screen shows the first
assignments for the Talk A and Talk B knobs (2 assignments).
• Page two shows the next set of assignments for the Talk A and
Talk B knobs (2 assignments).
• Page three shows the next set of assignments for the Talk A and
Talk B knobs (2 assignments).
Figure 5-15 shows how the front-panel screen on a beltpack
displays its six communications routes.
SELECT KEY TO BE EDITED
Pg1-2
SM1-A Pg2-1
A1-A Pg2-2
LTG1A Pg3-1
SM2-A
Pg3-2
AUD-A Pg1-1
STG-A
BACK