Clear-Com CELLCOM 10, Instruction Manual

Page: 66 / 168

Vitec Group Communications
CellCom-10 Instruction Manual
5 - 1 0
Figure 5-15: How a Beltpack Displays its Six Communication Routes
(“Labels”)
4. Select the beltpack key to assign a communication route to. For this
example, it is the beltpack’s Talk A key, page 1.
A screen appears with a list of available sources and destinations to
assign to this key. The list starts with the base-station 4-wire and
party line connections, followed by each of the ten individual
beltpacks, and finally by the ten available groups.
Figure 5-16: Select the source/destination to assign to that beltpack key
5. Scroll through the list and select the desired source or destination to
assign to that beltpack key. A box appears around the selection and
the next screen appears for assigning the key type.
6. Select either talk, listen, talk/listen, dual talk/listen, forced listen or
talk/forced listen for that key.
SELECT KEY 1 FOR STG-1 -- BPK01
HDSTB
HDSTB 4WIR1
4WIR1
4WIR2
4WIR2 4WIR3
4WIR3 BACK
HDSTA
HDSTA
--