Clear-Com CELLCOM 10, Instruction Manual

Page: 104 / 168

Vitec Group Communications
CellCom-10 Instruction Manual
7 - 1 2
From these displays, press button C to return to the status menu.
ASSIGN ROUTE
This facility allows the user to assign a route to a pushbutton (key).
Note: These features are not operational on CellCom-10 systems.
This is one of the procedures which requires Selection of Key and
Page. The procedure is as follows:
1. Enter Program Mode and navigate to the Pushbutton Menu.
2. Ensure that the currently selected Page is appropriate for the route
to be assigned to a key.
3. Select the # symbol on the Pushbutton menu and select the key
which appears next.
4. The Beltpack does not display any routes until it has downloaded all
of them and displays while it is doing so.
5. When downloaded, the display presents the full list of ports
.
6. Navigate the list using the UP and DOWN arrows and press Enter to
select the required route.
If the route cannot be assigned, the display will show either
8 Timeslot Number (used by Active Antenna)
9 Received Signal strength Indication (digital indication). This
is an arbitrary number in the range 0-52 and, therefore,
significant only in the context of a particular installation.
10 Block error rate for received frames.
11 Raw battery level indication.
Table 7-1: Connection Information
Item Description