Cisco Webex 800 Series User Manual Download Page 121 | Manualshive

Page: 121 / 130

background image

C H A P T E R

12

Product Safety and Security

•

Safety and Performance Information, on page 111

•

Compliance Statements, on page 115

•

Cisco Product Security Overview, on page 119

•

Important Online Information, on page 119

Safety and Performance Information

Read the following safety notices before installing or using your IP phone.

IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work
on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard
practices for preventing accidents. Use the statement number provided at the end of each warning to locate
its translation in the translated safety warnings that accompanied this device. Statement 1071

SAVE THESE INSTRUCTIONS

Warning

Read the installation instructions before using, installing, or connecting the system to the power source.
Statement 1004

Warning

Voice over IP (VoIP) service and the emergency calling service do not function if power fails or is disrupted.
After power is restored, you might have to reset or reconfigure equipment to regain access to VoIP and the
emergency calling service. In the USA, this emergency number is 911. You need to be aware of the emergency
number in your country. Statement 361

Warning

Ultimate disposal of this product should be handled according to all national laws and regulations. Statement
1040

Warning

Cisco Webex Wireless Phone 800 Series User Guide

111

«
...
119
120
121
122
123
...
»

Summary of Contents for Webex 800 Series



































































































































Reviews:

No comments

Related manuals for Webex 800 Series

Port-O-Rotary Phone

Brand: Sparkfun Electronics Pages: 2

Brand: CCL Pages: 22

Brand: DAINCUBE Pages: 35

Brand: Acrowave Pages: 31

3C 4G TECH ACCESSORIES SET

Brand: make it real Pages: 2

Clearsound AmpliDECT230

Brand: Geemarc Pages: 1

Brand: switel Pages: 4

Brand: AEG Pages: 84

Brand: SpectraLink Pages: 81

Brand: Aastra Pages: 7

Brand: Gigaset Pages: 137

ZTMO 711-0 Series

Brand: SSS Siedle Pages: 10

Brand: SSS Siedle Pages: 12

Brand: SSS Siedle Pages: 32

Brand: CybioTronics Pages: 56

Brand: AUDIOLINE Pages: 32

Brand: AUDIOLINE Pages: 1

Brand: AUDIOLINE Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands