Figure 3: Cisco Webex Wireless Phone 840 and 840S
Table 1: Cisco Webex Wireless Phone 840 and 840S Hardware and Buttons
Hardware or Buttons in Group
Group Number
On the top left of the phone is the round
Power
button, which turns the power on and off,
and locks and unlocks the screen.
1
On the top center of the 840S phone is the barcode scanner, and on the rop right is a round
red
Programmable Emergency
alarm button.
• Barcode scanner—If the phone is an 840S, scans a barcode.
•
Programmable Emergency
button—By default this programmable button is set as
an
Emergency
button. If configured, the button sends a preprogrammed emergency
panic alert.
2
On the top front of the phone is the receive speaker in the middle, and the front camera
on the right.
• Receive speaker—Receives audio.
• Front camera—Captures images.
3
On the right side of the phone is the
Programmable PTT
button. By default this
programmable button is set to activate PTT. If enabled, PTT sends broadcast messages
over preprogrammed channels like a walkie-talkie.
4
On the bottom front of the phone is the microphone, which captures your audio to send.
5
Cisco Webex Wireless Phone 800 Series User Guide
8
Your Phone
Hardware and Buttons
Summary of Contents for Webex 800 Series
Page 10: ...Cisco Webex Wireless Phone 800 Series User Guide x Contents ...
Page 40: ...Cisco Webex Wireless Phone 800 Series User Guide 30 Your Phone Battery Warranty ...
Page 76: ...Cisco Webex Wireless Phone 800 Series User Guide 66 Emergency App Cancel the Panic Alarm ...
Page 94: ...Cisco Webex Wireless Phone 800 Series User Guide 84 Barcode App Clean the Scanner Window ...
