Cisco Webex 800 Series User Manual Download Page 38

Page: 38 / 130

Use of an oven or dryer on the phone to speed up drying can damage the phone and voids the warranty.

Warning

If the phone doesn’t work after these steps, contact your system administrator.

Note

Procedure

Step 1

Immediately power off the phone and remove the battery.

Step 2

Shake excess liquid from the phone.

Step 3

Place the phone and battery in an area that is at room temperature and has good airflow.

Step 4

Let the phone and battery dry for 72 hours before you reconnect the battery and power on the phone.

More Help and Information

If you have questions about the functions available on your phone, contact your administrator.

The Cisco website (

http://www.cisco.com

) contains more information about the phones and call control

systems.

• For Quick Reference Guides and end-user guides in English, follow this link:

https://www.cisco.com/c/en/us/support/collaboration-endpoints/webex-wireless-phone/products-user-guide-list.html

• For guides in languages other than English, follow this link:

https://www.cisco.com/c/en/us/support/collaboration-endpoints/webex-wireless-phone/tsd-products-support-translated-end-user-guides-list.html

• For licensing information, follow this link:

https://www.cisco.com/c/en/us/support/collaboration-endpoints/webex-wireless-phone/products-licensing-information-listing.html

Accessibility

The phones are hearing aid compatible (HAC)

. They support all Android accessibility features. For more

information about Android accessibility features, see:

https://www.android.com/accessibility/

Cisco One-Year Limited Hardware Warranty Terms

Special terms apply to your hardware warranty and services that you can use during the warranty period.

Your formal Warranty Statement, including the warranties and license agreements applicable to Cisco software,
is available on Cisco.com at this URL:

https://www.cisco.com/go/hwwarranty

Cisco Webex Wireless Phone 800 Series User Guide

Your Phone

More Help and Information

Summary of Contents for Webex 800 Series



































































































































Search results

Summary of Contents for Webex 800 Series

Reviews:

Related manuals for Webex 800 Series

Brands by name

Popular brands

Cisco Webex 800 Series, User Manual

Search results

Summary of Contents for Webex 800 Series

Reviews:

Related manuals for Webex 800 Series

Brands by name

Popular brands