Cisco Sx350, Cli Manual

Page: 814 / 1323

Macro Commands
813 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
38
User Guidelines
When multiple global macros are applied to a switch, the global description text is
a concatenation of texts from a number of previously applied macros.
You can verify your settings by entering the show parser macro command with the
description keyword.
Examples
switchxxxxxx(config)# macro global description "set console timeout interval"
38.6 show parser macro
Use the show parser macro User EXEC mode command to display the parameters
for all configured macros or for one macro on the switch.
Syntax
show parser macro [{brief | description [interface
interface-id |
detailed]
|
name
macro-name }]
Parameters
•
brief
—
Display the name of all macros.
•
description [interface interface-id ] — Display the macro descriptions for all
interfaces or if an interface is specified, display the macro descriptions for
that interface.
•
name
macro-name—
Display information about a single macro identified by
the macro name.
•
detailed—Displays information for non-present ports in addition to present
ports.
Default Configuration
Display description of all macros on present ports.
If the detailed keyword is not used, only present ports are displayed.
Command Mode
User EXEC mode