manualshive.com logo in svg

Cisco Sx350, Cli Manual

Share
Download
Cisco Sx350 Cli Manual Download Page 246

Clock Commands

245

Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide

9

Parameters

•

day-of-the-week

—The starting day that the associated time range is in 

effect. The second occurrence is the ending day the associated statement 
is in effect. The second occurrence can be the following week (see 
description in the User Guidelines). Possible values are: mon, tue, wed, thu, 
fri, sat, and sun.

•

hh:mm

—The first occurrence of this argument is the starting hours:minutes 

(military format) that the associated time range is in effect. The second 
occurrence is the ending hours:minutes (military format) the associated 
statement is in effect. The second occurrence can be at the following day 
(see description in the User Guidelines). (Range: 0–23, mm: 0–59)

•

list

 day-of-the-week1

—Specifies a list of days that the time range is in 

effect.

Default Configuration

There is no periodic time when the time range is in effect.

Command Mode

Time-range Configuration mode

User Guidelines

The second occurrence of the day can be at the following week, e.g. Thursday–
Monday means that the time range is effective on Thursday, Friday, Saturday, 
Sunday, and Monday.

The second occurrence of the time can be on the following day, e.g. “22:00–2:00”. 

Example

switchxxxxxx(config)# 

time-range http-allowed

switchxxxxxx(config-time-range)# 

periodic mon 12:00 to wed 12:00

9.8

sntp anycast client enable

To enable the SNTP Anycast client, use the sntp anycast client enable command in 
Global Configuration mode. To restore the default configuration, use the no form of 
this command.

Summary of Contents for Sx350












































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands