Ethernet Configuration Commands
395
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
17
Parameters
interface-id—(Optional) Specifies an interface ID. The interface ID can be one of
the following types: Ethernet port or port-channel.
Default Configuration
All counters are cleared.
Command Mode
Privileged EXEC mode
Example
The following example clears the statistics counters for gi11.
switchxxxxxx#
clear counters gi1
1
17.15 set interface active
To reactivate an interface that was shut down, use the set interface active
Privileged EXEC mode command.
Syntax
set interface active
{interface-id}
Parameters
interface-id—(Optional) Specifies an interface ID. The interface ID can be one of
the following types: Ethernet port or port-channel.
Command Mode
Privileged EXEC mode
User Guidelines
This command is used to activate interfaces that were configured to be active, but
were shut down by the system.
Summary of Contents for Sx350
Page 1: ...Cisco Sx350 Ph 2 2 5 Devices Command Line Interface Reference Guide CLI GUIDE ...
Page 26: ...25 Cisco Sx350 Ph 2 2 5 Devices Command Line Interface Reference Guide 1 ...
Page 237: ...CDP Commands Cisco Sx350 Ph 2 2 5 Devices Command Line Interface Reference Guide 236 8 ...
Page 975: ...RADIUS Commands Cisco Sx350 Ph 2 2 5 Devices Command Line Interface Reference Guide 974 48 ...
