Cisco Sx350, Cli Manual

Page: 1284 / 1323

Virtual Local Area Network (VLAN) Commands
1283 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
67
Command Mode
User EXEC mode
Example
The following example displays subnets-groups information.
switchxxxxxx# show vlan subnets-groups
IP Subnet Address Mask Group ID
----------------- ----------- --------------
1.1.1.1 32 1
172.16.2.0 24 2
67.29 show interfaces switchport
Use the show interfaces switchport Privileged EXEC command to display the
administrative and operational status of all interfaces or a specific interface.
Syntax
show interfaces switchport [
interface-id
]
Parameters
•
Interface-id —Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or port-channel.
Command Mode
Privileged EXEC mode
Default
Displays the status of all interfaces.
User Guidelines
Each port mode has its own private configuration. The show interfaces switchport
command displays all these configurations, but only the port mode configuration
that corresponds to the current port mode displayed in "Administrative Mode" is
active.