Cisco Sx350, Cli Manual

Page: 1063 / 1323

Smartport Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 1062
55
Syntax
macro auto built-in parameters
smartport-type
[
parameter-name value
[ parameter-name value [ parameter-name value ]]]
no macro auto built-in parameters smartport-type
Parameters
•
smartport-type
—Smartport type (range: printer, desktop, guest, server,
host, ip_camera, ip_phone, ip_phone_desktop, switch, router or wireless
access point (ap)).
•
parameter-name value —Specifies the parameter name and its value. These
are the parameters of the built-in or user-defined macro defined in the
macro auto user smartport macro command
Default Configuration
The default value of parameter $native_vlan of the built-in Smartport macros is 1.
For other parameters, the default value is the parameter’s default value. For
instance, if the parameter is the native VLAN, the default value is the default native
VLAN.
Command Mode
Global Configuration mode
User Guidelines
By default, each Smartport type is associated with a pair of built-in macros: a
macro that applies the configuration and the anti macro (no macro) to remove the
configuration. The Smartport types are the same as the name of the
corresponding built-in Smartport macros, with the anti macro prefixed with no_.
The value of the parameter $voice_vlan cannot be changed by this command.
Example
To change the parameters of a built-in macro:
switchxxxxxx(config)# macro auto built-in parameters switch $native_vlan 2