Cisco Sx350, Cli Manual

Page: 151 / 1323

Address Table Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 150
4
Parameters
•
dynamic interface
interface-id
—Delete all dynamic (learned) addresses on
the specified interface.The interface ID can be one of the following types:
Ethernet port or port-channel. If interface ID is not supplied, all dynamic
addresses are deleted.
•
secure interface interface-id —Delete all the secure addresses learned on
the specific interface. A secure address on a MAC address learned on
ports on which port security is defined.
Default Configuration
For dynamic addresses, if interface-id is not supplied, all dynamic entries are
deleted.
Command Mode
Privileged EXEC mode
Examples
Example 1 - Delete all dynamic entries from the FDB.
switchxxxxxx#
clear mac address-table dynamic
Example 2 - Delete all secure entries from the FDB learned on secure port gi11.
switchxxxxxx# clear mac address-table secure interface gi11
4.21 mac address-table aging-time
To set the aging time of the address table, use the mac address-table aging-time
Global configuration command. To restore the default, use the no form of this
command.
Syntax
mac address-table aging-time seconds
no mac address-table aging-time