24
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
503
IP Addressing Commands
24.0
IP addresses and Layer 2 Interfaces
IP addresses can be configured on the following Layer 2 interfaces:
•
Ethernet port
•
Port channel
•
VLAN
•
Loopback port
Lists of Commands
24.1 ip address
Use the ip address Interface Configuration (Ethernet, VLAN, Port-channel) mode
command to define an IP address for an interface. Use the no form of this
command
to remove an IP address definition.
Syntax
ip address
ip-address
{
mask
| /
prefix-length
}
no ip address [
ip-address
]
Parameters
•
ip-address
—Specifies the IP address.
•
mask
—Specifies the network mask of the IP address.
•
prefix-length
—Specifies the number of bits that comprise the IP address
prefix. The prefix length must be preceded by a forward slash (/). (Range:
8–30)
Summary of Contents for Sx350
Page 1: ...Cisco Sx350 Ph 2 2 5 Devices Command Line Interface Reference Guide CLI GUIDE ...
Page 26: ...25 Cisco Sx350 Ph 2 2 5 Devices Command Line Interface Reference Guide 1 ...
Page 237: ...CDP Commands Cisco Sx350 Ph 2 2 5 Devices Command Line Interface Reference Guide 236 8 ...
Page 975: ...RADIUS Commands Cisco Sx350 Ph 2 2 5 Devices Command Line Interface Reference Guide 974 48 ...
