Cisco Sx350, Cli Manual

Page: 729 / 1323

IPv6 Prefix List Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 728
31
Example
The following example clears the hit count from the prefix list entries for the prefix
list named first_list that match the network mask 2001:0DB8::/35:
switchxxxxxx# clear ipv6 prefix-list first_list 2001:0DB8::/35
31.2 ipv6 prefix-list
Use the ipv6 prefix-list command in Global Configuration mode to create an entry
in an IPv6 prefix list. To delete the entry, use the no form of this command.
Syntax
ipv6 prefix-list
list-name
[seq
number
] {{deny|permit}
ipv6-prefix
/
prefix-length
[ge
ge-length ] [le le-length ]} | description text
no ipv6 prefix-list list-name [seq number ]
Parameters
•
list-name
—Name of the prefix list. The name may contain up to 32
characters.
•
seq seq-number —Sequence number of the prefix list entry being
configured. This is an integer value from 1 to 4294967294.
•
deny—Denies networks that matches the condition.
•
permit—Permits networks that matches the condition.
•
ipv6-prefix
—IPv6 network assigned to the specified prefix list. This
argument must be in the form documented in RFC 4293 where the address
is specified in hexadecimal—using 16-bit values between colons.
•
/ prefix-length —Length of the IPv6 prefix. A decimal value that indicates
how many of the high-order contiguous bits of the address comprise the
prefix (the network portion of the address). A slash mark must precede the
decimal value from 0 to 128. The zero
prefix-length may be used only with
the zero ipv6-prefix (::).
•
description
text
—Text that can be up to 80 characters in length.