Cisco Sx350, Cli Manual

Page: 1159 / 1323

SSD Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide 1158
60
Please reenter SSD passphrase:**********
60.3 ssd rule
To configure an SSD rule, use ssd rule in SSD Configuration mode. A device grants
read permission of sensitive data to users based on the SSD rules. A user that is
granted Both or Plaintext read permission is also granted permission to enter SSD
Configuration mode.
To delete user-defined rules and restore default rules, use no ssd rule.
Syntax
[encrypted] SSD rule { all | level-15 | default-user | user user-name }
{ secure | insecure | secure-xml-snmp | insecure-xml-snmp}
permission
{
encrypted-only
| plaintext-only | both |
exclude
}
default - read { encrypted | plaintext | exclude }
no ssd rule [ {
all
|
level-15
|
default-user
|
user user-name
}
{
secure
|
insecure
|
secure-xml-snmp
|
insecure-xml-snmp
}]
Command Mode
SSD Configuration mode.
Default Rules
The device has the following factory default rules:
Table 4: Default SSD Rules
Rule Key Rule Action
User Channel Read Permission Default Read Mode
level-15 secure-xml-snmp Plaintext Only Plaintext
level-15 secure Both Encrypted
level-15 insecure Both Encrypted
all insecure-xml-snmp Exclude Exclude
all secure Encrypted Only Encrypted
all insecure Encrypted Only Encrypted