Cisco Sx350, Cli Manual

Page: 1118 / 1323

Spanning-Tree Commands
1117 Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
58
User Guidelines
The priority value must be a multiple of 4096.
The switch with the lowest priority is the root of the spanning tree.
Example
The following example configures the spanning tree priority of instance 1 to 4096.
switchxxxxxx(config)# spanning-tree mst 1 priority 4096
58.19 spanning-tree mst max-hops
Use the spanning-tree mst max-hops Global Configuration mode command to
configure the number of hops in an MST region before the BDPU is discarded and
the port information is aged out. Use the no form of this command to restore the
default configuration.
Syntax
spanning-tree mst max-hops
hop-count
no spanning-tree mst max-hops
Parameters
max-hops hop-count —Specifies the number of hops in an MST region before the
BDPU is discarded. (Range: 1–40)
Default Configuration
The default number of hops is 20.
Command Mode
Global Configuration mode
Example
The following example configures the maximum number of hops that a packet
travels in an MST region before it is discarded to 10.
switchxxxxxx(config)#
spanning-tree mst max-hops
10