Cisco Small Business Pro User Manual Download Page 41 | Manualshive

Page: 41 / 201

background image

Installation and Configuration

User Guide

3-3

Pre-Requisites for Installation

As a part of the CallConnector Operator installation, you need to have certain PC network
connectivity and configuration information. These include:

Admin or Power User Account on Installation PC:

The installation program and the

CallConnector Operator require access to Windows registry and installation of services. These
changes can only be performed with an account with administrator or power user rights to the
personal computer.

Internet Access to the Software Download Site:

The installation files can be downloaded from

the Cisco software download site. You will need an account to login to the site.

IP Connectivity to the Operator’s Cisco Router:

The CallConnector Operator or Server PC

needs to connect to the Cisco router providing the telephone service. You will need the router IP
address.

Executive-Level Telnet Account:

After the installation, the CallConnector configuration program

connects to the Cisco router to download the router phone configuration information and if
necessary make changes. It uses the Telnet and HTTP access to the Router.

Configuration of Required Operator Features on the Cisco Router:

The Cisco Router need to

have certain features/services configured to provide an effective operator service. See section
below on Router Configuration for the CallConnector Operator.

PAK ID:

This is a number sent with the purchase of the CallConnector Operator. It is used

together with information from your personal computer to register and activate the license from
the Cisco Software License site.

Internet Access the CallConnector License Server:

The CallConnector Operator application

requires the license to be registered.

Additional Requirements for Server-Based Mode Installation

IP connectivity to the CallConnector Server

in the network configurations that you will be using

the CallConnector Operator. You should be able to access the CallConnector Server from your
personal computer.

Server PC IP-Address:

You will need to get the IP address of the CallConnector Operator

Server from your system administrator or service provider.

Login User Name and Password:

Your operator login name and password are required to log in

to the CallConnector Server. The password is case sensitive.

«
...
39
40
41
42
43
...
»

Summary of Contents for Small Business Pro










































































































































































































Reviews:

No comments

Related manuals for Small Business Pro

Brand: HameTech Pages: 42

Powerline MD 90222

Brand: Medion Pages: 124

Brand: Ubiquiti Pages: 32

AirWorks AWK-3131-RCC Series

Brand: Moxa Technologies Pages: 78

Brand: Waxess Pages: 27

Brand: NetComm Pages: 51

Brand: Kraun Pages: 55

Brand: Linksys Pages: 34

Brand: LG Pages: 56

Brand: LG Pages: 10

Brand: LG Pages: 20

Brand: LG Pages: 14

GoldStream LR3001

Brand: LG Pages: 89

Brand: LG Pages: 104

Brand: LG Pages: 128

Brand: LG Pages: 11

Brand: LG Pages: 365

Brand: Enterasys Pages: 52

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands