manualshive.com logo in svg

Cisco Small Business Pro, User Manual

Download the free User Manual for Cisco Small Business Pro, providing comprehensive insights and instructions for seamless integration. Unlock the full potential of your Cisco product by accessing our website, where you can easily download the manual and gain valuable insights into maximizing its features and functionality.

Share
Download
background image

Chapter 3 

Installation and Configuration 

3-2  CallConnector Operator 
 

CallConnector Operator Installation Overview 

 
The CallConnector Operator can be deployed in two modes: 
 

Standalone:

 In this configuration, all the software for controlling the phone and accessing the 

contact data are installed and run on the attendant’s personal computer. There is no dependency 
on external software components. There is an installation program (CallConnector Operator – 
Standalone) for this mode that checks the system configuration, copies the software to the hard 
disk, and provides the tools to make the required configuration settings. 
 

Server-based:

 In the server-client mode, the controlling software is installed and run on a server 

computer to be accessed by the CallConnector Operator application. Each CallConnector 
Operator is installed on a separate computer and obtains the configuration data and contact 
information from the server. There is an installation program (CallConnector Operator client) to 
install the CallConnector client on the operators’ PC. The instruction for installing the 
CallConnector Server is available from the Server Administrator’s Guide. This chapter will discuss 
only the installation process for the CallConnector Operator Standalone and CallConnector 
Operator Client programs. 
 
The installation of the CallConnector Operator client or standalone mode involves the following 
steps: 
 

•

 

Collecting the information required for installing and configuring the CallConnector 
Operator. This includes obtaining the access rights to the download site for the 
installation program as well as the information that required during the installation 
process. See the Pre-requisites for Installation section below for these parameters. 
 

•

 

Configuring the Cisco Router for the features required by the operator – including the 
operator’s phone, the routing of calls to the operator phone and also setting up the Telnet 
access to allow the configuration program to setup the attendant. See the Router 
Configuration Required for the CallConnector Operator section below. 

 

•

 

Acquiring the CallConnector Operator installation program. This can be downloaded from 
the Cisco Software Download Site or obtained from your Cisco channel partner. 
 

•

 

Running the CallConnector Operator client or standalone installation on your personal 
computer, and entering the configuration information requested by the installation and 
configuration wizards. 
 

•

 

Registering the CallConnector Operator license by entering the PAK-ID or Serial Number 
during the activation process. 
 

•

 

Setting up the CallConnector Operator configuration parameters. 

 

•

 

Verifying that you are able to receive and make calls from CallConnector Operator user 
interfaces and able to access your contact data. 

 

 

Summary of Contents for Small Business Pro










































































































































































































Reviews:

No comments

Related manuals for Small Business Pro

Ubiquiti NanoStation M2 Quick Start Manual preview
NanoStation M2
Brand: Ubiquiti Pages: 16
Ubiquiti UAP-PRO Quick Start Gude preview
UAP-PRO
Brand: Ubiquiti Pages: 24
Ubiquiti AirRouter User Manual preview
AirRouter
Brand: Ubiquiti Pages: 38
Ubiquiti UF-Nano Quck Start Gude preview
UF-Nano
Brand: Ubiquiti Pages: 14
Ublox TOBY-R2 Series System Integration Manual preview
TOBY-R2 Series
Brand: Ublox Pages: 151
Ubiquiti NB?2G18 Installation Manual preview
NB?2G18
Brand: Ubiquiti Pages: 2
SMC Networks EliteConnect SMC2555W-AG2 Specifications preview
EliteConnect SMC2555W-AG2
Brand: SMC Networks Pages: 2
LevelOne PLI-3411 Quick Installation Manual preview
PLI-3411
Brand: LevelOne Pages: 33
Planet WNRT-625 User Manual preview
WNRT-625
Brand: Planet Pages: 42
Ubiquiti UniFi UAP-FlexHD Quick Start Manual preview
UniFi UAP-FlexHD
Brand: Ubiquiti Pages: 22
WIDCOMM BT0002M3 User Manual preview
BT0002M3
Brand: WIDCOMM Pages: 41
Obihai OBi100 Quick Start Manual preview
OBi100
Brand: Obihai Pages: 4
Sierra Wireless AirPrime BX3100 Hardware Integration Manual preview
AirPrime BX3100
Brand: Sierra Wireless Pages: 33
HP Aruba AP-375 Product End-Of-Life Disassembly Instructions preview
Aruba AP-375
Brand: HP Pages: 5
HP Aruba AP-587 Disassembly Instructions preview
Aruba AP-587
Brand: HP Pages: 5
HP MSM310-R Installation Manual preview
MSM310-R
Brand: HP Pages: 24
HP Aruba AP-577 Product End-Of-Life Disassembly Instructions preview
Aruba AP-577
Brand: HP Pages: 4
HP Aruba AP-374 Product End-Of-Life Disassembly Instructions preview
Aruba AP-374
Brand: HP Pages: 4

Brands by name

Popular brands

Load more brands