Show Commands
show ip pim rp-hash
MCR-87
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
show ip pim rp-hash
To display information about the RP-hash values for IPv4 Protocol Independent Multicast (PIM), use the
show ip pim rp-hash
command.
show ip pim rp-hash
group
[
vrf
{
vrf-name
|
all
|
default
|
management
}]
Syntax Description
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to display information about IPv4 PIM RP-hash values:
switch(config)#
show ip pim rp-hash 224.1.1.1
group
Group address for RP lookup.
vrf
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
vrf-name
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
all
Specifies all VRFs.
default
Specifies the default VRF.
management
Specifies the management VRF.
Release
Modification
5.0(3)N1(1)
This command was introduced.