Show Commands
show ip mroute summary
MCR-50
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
show ip mroute summary
To display summary information about IPv4 multicast routes, use the
show ip mroute summary
command.
show ip mroute summary
[
count
|
software-forwarded
] [
vrf
{
vrf-name
|
all
}]
show ip mroute
[
group
]
summary
[
software-forwarded
] [
vrf
{
vrf-name
|
all
}]
Syntax Description
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to display summary information about IPv4 multicast routes:
switch(config)#
show ip mroute summary
IP Multicast Routing Table for VRF "default"
Total number of routes: 1
Total number of (*,G) routes: 0
Total number of (S,G) routes: 0
Total number of (*,G-prefix) routes: 1
Group count: 0, rough average sources per group: 0.0
count
(Optional) Displays only route counts.
software-
forwarded
(Optional) Displays software-switched route counts only.
vrf
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
vrf-name
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
all
Specifies all VRFs.
group
(Optional) Specifies a group address for a route.
Release
Modification
5.0(3)N1(1)
This command was introduced.
