Show Commands
show ipv6 mld local-groups
MCR-95
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
show ipv6 mld local-groups
To display information about the local group membership for Multicast Listener Discovery (MLD), use
the
show ipv6 mld local-groups
command.
show ipv6
[
icmp
]
mld local-groups
[
if-type
if-number
] [
vrf
{
vrf-name
|
all
}]
Syntax Description
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines
This command requires the Enterprise Services license.
Examples
This example shows how to display information about MLD local groups:
switch(config)#
show ipv6 mld local-groups
MLD Locally Joined Group Membership for VRF "default"
Group Type Interface Last Reported
(*, ff13::0001)
Local Eth2/1 00:00:55
(*, ff13::0002)
Local Eth2/1 00:00:46
(*, ff13::0003)
icmp
(Optional) Specifies ICMPv6 commands.
if-type
(Optional) Interface type. For more information, use the question mark (?) online
help function.
if-number
(Optional) Interface or subinterface number. For more information about the
numbering syntax for your networking device, use the question mark (?) online help
function.
vrf
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
vrf-name
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
all
Specifies all VRFs.
Release
Modification
5.0(3)N1(1)
This command was introduced.
