Show Commands
show ip mroute
MCR-48
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
show ip mroute
To display information about IPv4 multicast routes, use the
show ip mroute
command.
show ip mroute
{
group
| {
source group
} | {
group
[
source
]}} [
summary
[
software-forwarded
]]
[
vrf
{
vrf-name
|
all
}]
Syntax Description
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to display information about IPv4 multicast routes:
switch(config)#
show ip mroute
IP Multicast Routing Table for VRF "default"
(*, 232.0.0.0/8), uptime: 04:18:55, pim ip
Incoming interface: Null, RPF nbr: 0.0.0.0
Outgoing interface list: (count: 0)
switch(config)#
group
Group address for route.
source
Source address for route.
summary
(Optional) Displays route counts and packet rates.
software-
forwarded
(Optional) Displays software-switched route counts only.
vrf
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
vrf-name
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
all
Specifies all VRFs.
Release
Modification
5.0(3)N1(1)
This command was introduced.
