454
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter Show Commands
show ipv6 pim route
show ipv6 pim route
To display information about IPv6 Protocol Independent Multicast (PIM6) routes, use the
show ipv6
pim route
command.
show ipv6 pim route
{
source
group
|
group
[
source
]} [
vrf
{
vrf-name
|
all
}]
Syntax Description
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines
This command requires the Enterprise Services license.
Examples
This example shows how to display PIM6 routes:
switch(config)#
show ipv6 pim route
PIM6 Routing Table for VRF "default" - 1 entries
(*, ff30::/32), expires 00:02:33
Incoming interface: Null, RPF nbr 0::
Oif-list: (0) 00000000, timeout-list: (0) 00000000
Immediate-list: (0) 00000000, timeout-list: (0) 00000000
Timeout-interval: 2, JP-holdtime round-up: 3
switch(config)#
source
Source address.
group
Group address.
vrf
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
vrf-name
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
all
Specifies all VRFs.
Release
Modification
5.0(3)N1(1)
This command was introduced.
