182
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter Show Commands
show ip igmp interface
show ip igmp interface
To display information about IGMP on interfaces, use the
show ip igmp interface
command.
show ip igmp interface
{
ethernet
slot
/
port
|
port-channel
channel-number
[
.
sub_if_number
]
|
vethernet
veth-id
|
vlan
vlan-id
}
show ip igmp interface
[
brief
] [
vrf
{
vrf-name
|
all
}]
Syntax Description
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines
This command does not require a license.
ethernet
slot
/
port
Specifies the Ethernet interface and the slot number and port number. The slot
number is from 1 to 255, and the port number is from 1 to 128.
port-channel
number
Specifies the EtherChannel interface and EtherChannel number. The range is from 1
to 4096.
sub_if_number
Subinterface number. The range is from 1 to 4093.
vethernet
veth-id
Specifies the virtual Ethernet interface. The range is from 1 to 1,048,575.
vlan
vlan-id
Specifies the VLAN. The range is from 1 to 4094.
brief
(Optional) Displays one line status per interface.
vrf
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
vrf-name
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
all
Specifies all VRFs.
Release
Modification
6.0(2)N1(1)
This command was introduced.
4.1(3)
Changed output to include vPC information when IGMP is in vPC mode.
