420
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
Chapter Show Commands
show ip pim interface
show ip pim interface
To display information about the enabled interfaces for IPv4 Protocol Independent Multicast (PIM), use
the
show ip pim interface
command.
show ip pim interface
[
brief
] [
vrf
{
vrf-name
|
all
|
default
|
management
}]
show ip pim interface ethernet
{
slot
/
port
|
port-channel
channel-number
[.
sub_if-number
]
|
vethernet
veth-id
|
vlan
vlan-id
}
Syntax Description
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines
This command requires the LAN Base Services license.
brief
(Optional) Specifies a brief format for display.
vrf
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
vrf-name
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
all
Specifies all VRFs.
default
Specifies the default VRF.
management
Specifies the management VRF.
ethernet
slot
/
port
Specifies the Ethernet interface and the slot number and port number. The slot
number is from 1 to 255, and the port number is from 1 to 128.
port-channel
number
Specifies the EtherChannel interface and EtherChannel number. The range is from 1
to 4096.
sub_if-number
(Optional) Subinterface number. The range is from 1 to 4093.
vethernet
veth-id
Specifies the virtual Ethernet interface. The range is from 1 to 1,048,575.
vlan
vlan-id
Specifies the VLAN. The range is from 1 to 4094.
Release
Modification
6.0(2)N1(1)
This command was introduced.
5.0(2)
Information on Bidirectional Forwarding Detection (BFD) was added.
