Cisco Nexus 5600 Series Reference Download Page 232

Page: 232 / 480

228

Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference

OL-31626-01

Chapter Show Commands

show ip igmp snooping statistics

To display information about IGMP snooping statistics, use the

show ip igmp snooping statistics

command.

show ip igmp snooping statistics

[

vlan

vlan-id

global

]

Syntax Description

Command Default

None

Command Modes

Any command mode

Supported User Roles

network-admin
network-operator
vdc-admin
vdc-operator

Command History

Usage Guidelines

When you use this command without any options, the system prints statistics for all VLANs.

This command does not require a license.

Examples

This example shows how to display information about IGMP snooping statistics for VLAN 1:

switch(config)#

show ip igmp snooping statistics vlan 1

vlan

vlan-id

(Optional) Specifies a VLAN. The range is from 1 to 3967 and 4048 to 4093.

global

(Optional) Specifies the global statistics.

Release

Modification

6.0(2)N1(1)

This command was introduced.

4.1(3)

Changed output to include vPC information.

4.2(1)

Enhanced output for vPC information.

4.2(2)

Changed command to make the

vlan

argument optional and to introduce the

optional

global

argument.

Summary of Contents for Nexus 5600 Series

































































































































































































































































































































































































































































































Search results

Summary of Contents for Nexus 5600 Series

Reviews:

Related manuals for Nexus 5600 Series

Brands by name

Popular brands

Cisco Nexus 5600 Series, Reference

Search results

Summary of Contents for Nexus 5600 Series

Reviews:

Related manuals for Nexus 5600 Series

Brands by name

Popular brands