Cisco Nexus 5600 Series Reference Download Page 158

Page: 158 / 480

154

Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference

OL-31626-01

Chapter I Commands

ip igmp immediate-leave

To enable the device to remove the group entry from the multicast routing table immediately upon
receiving a leave message for the group, use the

ip igmp immediate-leave

command. To disable the

immediate leave option, use the

form of this command.

ip igmp immediate-leave

no ip igmp immediate-leave

Syntax Description

This command has no arguments or keywords.

Command Default

The immediate leave feature is disabled.

Command Modes

Interface configuration mode

Supported User Roles

network-admin
vdc-admin

Command History

Usage Guidelines

Use the

ip igmp immediate-leave

command only when there is one receiver behind the interface for a

given group.

This command does not require a license.

Examples

This example shows how to enable the immediate leave feature:

switch(config)#

interface ethernet 2/2

switch(config-if)#

ip igmp immediate-leave

This example shows how to disable the immediate leave feature:

switch(config)#

interface ethernet 2/2

switch(config-if)#

no ip igmp immediate-leave

Related Commands

Release

Modification

6.0(2)N1(1)

This command was introduced.

Command

Description

show ip igmp interface

Displays IGMP information about the interface.

Summary of Contents for Nexus 5600 Series

































































































































































































































































































































































































































































































Search results

Summary of Contents for Nexus 5600 Series

Reviews:

Related manuals for Nexus 5600 Series

Brands by name

Popular brands

Cisco Nexus 5600 Series, Reference

Search results

Summary of Contents for Nexus 5600 Series

Reviews:

Related manuals for Nexus 5600 Series

Brands by name

Popular brands