Show Commands
show ip igmp route
MCR-38
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
show ip igmp route
To display information about the IGMP-attached group membership, use the
show ip igmp route
command.
show ip igmp route
[{
source
[
group
]} | {
group
[
source
]}] [
ethernet
slot
/
port
|
port-channel
channel-number
[
.
sub_if_number
]
|
vethernet
veth-id
|
vlan
vlan-id
] [
vrf
{
vrf-name
|
all
}]
Syntax Description
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines
The
show ip igmp groups
command is an alternative form of this command.
This command does not require a license.
source
Source IP address.
group
(Optional) Multicast IP address of single group to display.
ethernet
slot
/
port
Specifies the Ethernet interface and the slot number and port number. The slot
number is from 1 to 255, and the port number is from 1 to 128.
port-channel
number
Specifies the EtherChannel interface and EtherChannel number. The range is from 1
to 4096.
sub_if_number
Subinterface number. The range is from 1 to 4093.
vethernet
veth-id
Specifies the virtual Ethernet interface. The range is from 1 to 1,048,575.
vlan
vlan-id
Specifies the VLAN. The range is from 1 to 4094.
vrf
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
vrf-name
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
all
Specifies all VRFs.
Release
Modification
5.0(3)N1(1)
This command was introduced.
