Show Commands
show ip pim rp
MCR-85
Cisco Nexus 5600 Series NX-OS Multicast Routing Command Reference
OL-31626-01
show ip pim rp
To display information about the rendezvous points (RPs) for IPv4 Protocol Independent Multicast
(PIM), use the
show ip pim rp
command.
show ip pim rp
[
group
] [
vrf
{
vrf-name
|
all
|
default
|
management
}]
Syntax Description
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to display information about IPv4 PIM RPs:
switch(config)#
show ip pim rp
PIM RP Status Information for VRF "default"
BSR disabled
Auto-RP disabled
BSR RP Candidate policy: None
BSR RP policy: None
Auto-RP Announce policy: None
Auto-RP Discovery policy: None
switch(config)#
group
(Optional) Group address.
vrf
(Optional) Applies to a virtual routing and forwarding (VRF) instance.
vrf-name
VRF name. The name can be a maximum of 32 alphanumeric characters and is case
sensitive.
all
Specifies all VRFs.
default
Specifies the default VRF.
management
Specifies the management VRF.
Release
Modification
5.0(3)N1(1)
This command was introduced.
