Cisco Linksys RV016, User Manual

Page: 35 / 112

Chapter 4
Advanced Configuration
28
10/100 16-Port VPN Router
Summary (Rate Control Selected)
To change a rule, click
Edit
. To update the list, click
Refresh
. To return to the Bandwidth Management screen,
click
Close
.
On the Bandwidth Management screen, click
Save Settings
to save your changes, or click
Cancel Changes
to undo
them.
Priority
System Management > Bandwidth Management > Priority
Interface
Select the appropriate WAN interface.
Service Select the Service you want.
If the Service you need is not listed in the menu, click
Service Management to add the new service. The Service
Management screen appears.
Service Management
Service Name
Enter a name.
Protocol Select the protocol it uses.
Port Range Enter its range.
Click Add to List . Click Save Settings to save your changes,
or click Cancel Changes to undo them. Click Exit to return
to the Bandwidth Management screen.
If you want to modify a service you have created, select it
and click Update this service . Make changes. Click Save
Settings to save your changes, or click Cancel Changes
to undo them. Click Exit to return to the Bandwidth
Management screen.
If you want to delete a service you have created, select it
and click Delete selected service . Click Save Settings
to save your changes, or click Cancel Changes to undo
them. Click Exit to return to the Bandwidth Management
screen.
Direction
Select
Upstream
for outbound traffic, or select
Downstream
for inbound traffic.
Priority
Select
High
,
Middle
, or
Low
. High priority
services will share 30% of the total system bandwidth.
Middle priority services will share 60% of the total system
bandwidth. Low priority services will share 10% of the
total bandwidth. The default is
Middle
.
Enable
Select
Enable
to use this Priority rule.
Click
Add to List
, and configure as many rules as you
would like, up to a maximum of 50. To delete a rule, select
it and click
Delete selected application
.
Click
Summary
to see a summary of the Priority rules. The
Summary screen appears.
Summary (Priority Selected)
To change a rule, click Edit . To update the list, click
Refresh . To return to the Bandwidth Management screen,
click Close .
On the
Bandwidth Management
screen, click
Save Settings
to save your changes, or click
Cancel Changes
to undo
them.
System Management > SNMP
SNMP, or Simple Network Management Protocol, is a
network protocol that provides network administrators
with the ability to monitor the status of the Router and
receive notification of any critical events as they occur on
the network. The Router supports SNMP v1/v2c and all
relevant Management Information Base II (MIBII) groups.