Chapter 4
Advanced Configuration
57
10/100 16-Port VPN Router
PPPoE
Complete the
User Name
and
Password
fields with the
information provided by your ISP.
Click
Next
to continue. Click
Previous
if you want to
return to the previous screen. Click
Exit
if you want to
exit the Setup Wizard.
PPPoE
Select
Connect on demand
or
Keep alive
. If you select
the Connect on demand option, the connection will
be disconnected after a specified period of inactivity
(Max Idle Time). If you have been disconnected due
to inactivity, Connect on Demand enables the Router
to automatically re-establish your connection as soon
as you attempt to access the Internet again. Enter
the number of minutes you want to have elapsed
before your Internet access disconnects. The default is
5
minutes.
If you select the Keep alive option, the Router will keep
the connection alive by sending out a few data packets
periodically, so your ISP thinks that the connection is
still active. This option keeps your connection active
indefinitely, even when it sits idle. The default Redial
Period is
30
seconds. The default Keepalive Interval
is
30
seconds. The default Keepalive Retry Times is
5
times.
Click
Next
to continue, and proceed to step 6. Click
Previous
if you want to return to the previous screen.
Click
Exit
if you want to exit the Setup Wizard.
Connect on Demand or Keep Alive
To set up additional WAN ports, repeat step 5.
6.
For the DMZ port, complete the
7.
DMZ IP
and
Subnet Mask
fields with the information provided by your ISP.
Click
Next
to continue, and proceed to step 8. Click
Previous
if you want to return to the previous screen.
Click
Exit
if you want to exit the Setup Wizard.
DMZ
