Cisco Linksys RV016, User Manual

Page: 34 / 112

Chapter 4
Advanced Configuration
27
10/100 16-Port VPN Router
System Management > Bandwidth Management > Rate Control
Bandwidth Management
The Maximum Bandwidth provided by ISP
Upstream
Enter the maximum upstream bandwidth
provided by your ISP. The default is
512
kbit/sec.
Downstream
Enter the maximum downstream
bandwidth provided by your ISP. The default is
512
kbit/sec.
Bandwidth Management Type
Type Select the type of functionality you want to use,
Rate Control or Priority . Rate Control functionality is
for minimum (guaranteed) bandwidth and maximum
(limited) bandwidth by service or IP address, while
Priority functionality is for services. Then proceed to the
instructions for the type you selected.
Rate Control
Interface Select the appropriate WAN interface.
Service Select the Service you want.
If the Service you need is not listed in the menu, click
Service Management
to add the new service. The Service
Management screen appears.
Service Management
Service Name
Enter a name.
Protocol Select the protocol it uses.
Port Range Enter its range.
Click Add to List . Click Save Settings to save your changes,
or click Cancel Changes to undo them. Click Exit to return
to the Bandwidth Management screen.
If you want to modify a service you have created, select it
and click Update this service . Make changes. Click Save
Settings to save your changes, or click Cancel Changes
to undo them. Click Exit to return to the Bandwidth
Management screen.
If you want to delete a service you have created, select it
and click
Delete selected service
. Click
Save Settings
to save your changes, or click
Cancel Changes
to undo
them. Click
Exit
to return to the Bandwidth Management
screen.
IP
Enter the IP address or range you need to control. To
include all internal IP addresses, keep the default,
0
.
Direction
Select
Upstream
for outbound traffic, or select
Downstream
for inbound traffic.
Min. Rate
Enter the minimum rate for the guaranteed
bandwidth.
Max. Rate
Enter the maximum rate for the maximum
bandwidth.
Enable
Select
Enable
to use this Rate Control rule.
Click Add to List , and configure as many rules as you
would like, up to a maximum of 100. To delete a rule, select
it and click Delete selected application .
Click Summary to see a summary of the Rate Control
rules.