Cisco Linksys RV016 User Manual Download Page 37

Page: 37 / 112

Chapter 4

Advanced Configuration

10/100 16-Port VPN Router

System Management > Diagnostic > Ping

Ping host or IP address

Enter the IP address of the device

being pinged, and click

. The test will take a few seconds

to complete. Then the Router will display the results.

Status

The status of the ping test is displayed.

Packets

The number of packets transmitted, number

of packets received, and percentage of packets lost are

displayed.

Round Trip Time

The minimum, maximum, and average

round trip times are displayed.

System Management > Factory Default

Use this screen to clear all of your configuration information

and restore the Router to its factory default settings. Only

use this feature if you wish to discard all the settings and

preferences that you have configured.

System Management > Factory Default

Factory Default

Return to Factory Default Setting

Click

Return to

Factory Default Setting

if you want to restore the Router

to its factory default settings. After clicking the button, a

confirmation screen appears. Click

to continue.

Factory Default Confirmation

System Management > Firmware Upgrade

You can use this feature to upgrade the Router’s firmware

to the latest version.

System Management > Firmware Upgrade

Firmware Upgrade

To download the firmware, refer to the Firmware Download

instructions. If you have already downloaded the firmware

onto your computer, then click the

Browse

button to look

for the extracted file.

Firmware Upgrade Right Now

After you have selected

the extracted file, click

Firmware Upgrade Right Now

NOTE:

The Router will take approximately ten

minutes to upgrade its firmware. During this

process, do not power off the Router or press

the Reset button.

Firmware Download

Firmware Download from Linksys Web Site

If you need

to download the latest version of the Router’s firmware,

click

Firmware Download from Linksys Web Site

. The

Support page of the Linksys website appears.
Follow the on-screen instructions to access the Downloads

page for the 10/100 16-Port VPN Router (model number:

RV016). Then download the firmware upgrade file.
Extract the file on your computer. Then follow the Firmware

Upgrade instructions.

System Management > Restart

If you need to restart the Router, Linksys recommends that

you use the Restart tool on this screen. When you restart

Summary of Contents for Linksys RV016

















































































































Search results

Summary of Contents for Linksys RV016

Reviews:

Related manuals for Linksys RV016

Brands by name

Popular brands

Cisco Linksys RV016, User Manual

Search results

Summary of Contents for Linksys RV016

Reviews:

Related manuals for Linksys RV016

Brands by name

Popular brands