B-10
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-03
Appendix B Working with the Cisco IOS File System, Configuration Files, and Software Images
Working with Configuration Files
Creating a Configuration File By Using a Text Editor
When creating a configuration file, you must list commands logically so that the system can respond
appropriately. This is one method of creating a configuration file:
Step 1
Copy an existing configuration from a switch to a server.
For more information, see the
“Downloading the Configuration File By Using TFTP” section on
page B-11
, the
“Downloading a Configuration File By Using FTP” section on page B-13
, or the
“Downloading a Configuration File By Using RCP” section on page B-17
.
Step 2
Open the configuration file in a text editor, such as vi or emacs on UNIX or Notepad on a PC.
Step 3
Extract the portion of the configuration file with the desired commands, and save it in a new file.
Step 4
Copy the configuration file to the appropriate server location. For example, copy the file to the TFTP
directory on the workstation (usually
/
tftpboot on a UNIX workstation).
Step 5
Make sure the permissions on the file are set to world-read.
Copying Configuration Files By Using TFTP
You can configure the switch by using configuration files you create, download from another switch, or
download from a TFTP server. You can copy (upload) configuration files to a TFTP server for storage.
These sections contain this configuration information:
•
Preparing to Download or Upload a Configuration File B y Using TFTP, page B-10
•
Downloading the Configuration File By Using TFTP, page B-11
•
Uploading the Configuration File By Using TFTP, page B-11
Preparing to Download or Upload a Configuration File B y Using TFTP
Before you begin downloading or uploading a configuration file by using TFTP, do these tasks:
•
Ensure that the workstation acting as the TFTP server is properly configured. On a Sun workstation,
make sure that the /etc/inetd.conf file contains this line:
tftp dgram udp wait root /usr/etc/in.tftpd in.tftpd -p -s /tftpboot
Make sure that the /etc/services file contains this line:
tftp 69/udp
Note
You must restart the inetd daemon after modifying the /etc/inetd.conf and /etc/services files.
To restart the daemon, either stop the inetd process and restart it, or enter a
fastboot
command (on the SunOS 4.x) or a
reboot
command
(on Solaris 2.x or SunOS 5.x). For more
information on the TFTP daemon, see the documentation for your workstation.
•
Ensure that the switch has a route to the TFTP server. The switch and the TFTP server must be in
the same subnetwork if you do not have a router to route traffic between subnets. Check connectivity
to the TFTP server by using the
ping
command.
