2-6
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-03
Chapter 2 Using the Command-Line Interface
Using Command History
Using Command History
The software provides a history or record of commands that you have entered. The command history
feature is particularly useful for recalling long or complex commands or entries, including access lists.
You can customize this feature to suit your needs as described in these sections:
•
Changing the Command History Buffer Size, page 2-6
(optional)
•
Recalling Commands, page 2-6
(optional)
•
Disabling the Command History Feature, page 2-7
(optional)
Changing the Command History Buffer Size
By default, the switch records ten command lines in its history buffer. You can alter this number for a
current terminal session or for all sessions on a particular line. These procedures are optional.
Beginning in privileged EXEC mode, enter this command to change the number of command lines that
the switch records during the current terminal session:
Switch#
terminal history
[
size
number-of-lines
]
The range is from 0 to 256.
Beginning in line configuration mode, enter this command to configure the number of command lines
the switch records for all sessions on a particular line:
Switch(config-line)#
history
[
size
number-of-lines
]
The range is from 0 to 256.
Recalling Commands
To recall commands from the history buffer, perform one of the actions listed in
Table 2-4
. These actions
are optional.
Table 2-4
Recalling Commands
Action
1
1.
The arrow keys function only on ANSI-compatible terminals such as VT100s.
Result
Press
Ctrl-P
or the up arrow key.
Recall commands in the history buffer, beginning with the most recent command.
Repeat the key sequence to recall successively older commands.
Press
Ctrl-N
or the down arrow key.
Return to more recent commands in the history buffer after recalling commands
with
Ctrl-P
or the up arrow key. Repeat the key sequence to recall successively
more recent commands.
show history
While in privileged EXEC mode, list the last several commands that you just
entered. The number of commands that appear is controlled by the setting of the
terminal history
global configuration command and the
history
line configuration
command.
