31-6
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-03
Chapter 31 Configuring RMON
Displaying RMON Status
To disable the collection of group Ethernet statistics, use the
no rmon collection stats
index
interface
configuration command.
This example shows how to collect RMON statistics for the owner
root
:
Switch(config)#
interface gigabitethernet1/1
Switch(config-if)#
rmon collection stats 2 owner root
Displaying RMON Status
To display the RMON status, use one or more of the privileged EXEC commands in
Table 31-1
:
For information about the fields in these displays, see the “System Management Commands” section in
the
Cisco IOS Configuration Fundamentals Command Reference, Release 12.2
from the Cisco.com page
under
Documentation
>
Cisco IOS Software
>
12.2 Mainline
>
Command References
.
Step 3
rmon collection stats
index
[
owner
ownername
] Enable RMON statistic collection on the interface.
•
For
index
, specify the RMON group of statistics. The range
is from 1 to 65535.
•
(Optional) For
owner
ownername
, enter the name of the
owner of the RMON group of statistics.
Step 4
end
Return to privileged EXEC mode.
Step 5
show running-config
Verify your entries.
Step 6
show rmon statistics
Display the contents of the switch statistics table.
Step 7
copy running-config startup-config
(Optional) Save your entries in the configuration file.
Command
Purpose
Table 31-1
Commands for Displaying RMON Status
Command
Purpose
show rmon
Displays general RMON statistics.
show rmon alarms
Displays the RMON alarm table.
show rmon events
Displays the RMON event table.
show rmon history
Displays the RMON history table.
show rmon statistics
Displays the RMON statistics table.