5-10
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-03
Chapter 5 Configuring Cisco EnergyWise
Managing Single Entities
Step 3
energywise domain
domain-name
secret
[
0
|
7
]
password
[
protocol
udp
port
udp-port-number
[
interface
interface-id |
ip
ip-address
]]
Enable EnergyWise on the entity, assign the entity to a domain
with the specified
domain-name
, and set the
password
for secure
communication among the entities in the domain.
•
(Optional)
0
—Use an unencrypted password. This is the
default.
•
(Optional)
7
—Use a hidden password.
If you do not enter
0
or
7
, the entity uses the default value of
0.
•
(Optional)
port
udp-port-number
—Specify the UDP port
that sends and receives queries.
The range is from 1 to 65000.
The default is 43440.
•
(Optional)
interface
interface-id
—Specify the port that
sends EnergyWise messages.
•
(Optional)
ip
ip-address—
Specify the IP address of the port
that sends EnergyWise messages.
For the
domain-name
and
password
,
•
You can enter alphanumeric characters and symbols such as
#, (, %, !, or &.
•
Do not use an asterisk (*) or a blank space between the
characters and symbols.
By default, no domain and password are assigned.
Step 4
interface
interface-id
Specify the port or a range of ports to be configured, and enter
interface configuration mode.
Step 5
energywise level 10 recurrence
importance
importance
at
minute
hour
day_of_month
month
day_of_week
(Optional) Schedule the power-on recurrence.
•
importance
importance
—Set the importance of the port in
the domain. The range is from 1 to 100. The default is 1.
•
minute
—The range is from 0 to 59. Use
*
for the wildcard.
•
hour
—The range is from 0 to 23. Use
*
for the wildcard.
•
day_of_month
—The range is from 1 to 31. Use
*
for the
wildcard.
•
month
—The range is from 1 (January) to 12 (December). Use
*
for the wildcard.
•
day_of_week
—The range is from 0 (Sunday) to 6 (Saturday).
Use * for the wildcard.
Note
The specified time is the local time based on the
PoE-entity time zone.
Command
Purpose
