manualshive.com logo in svg

Cisco Catalyst 3550, Software Configuration Manual

The Cisco Catalyst 3550 is a powerful network switch that provides high-performance networking capabilities. Ensure a smooth installation with the comprehensive Installation Manual, available for free download from manualshive.com. This manual offers step-by-step instructions and valuable insights to maximize the potential of your Catalyst 3550, delivering exceptional networking performance.

Share
Download
background image

C H A P T E R

 

27-1

Catalyst 3550 Multilayer Switch Software Configuration Guide

78-11194-03

27

Troubleshooting

This chapter describes how to identify and resolve software problems related to the IOS software. 
Depending on the nature of the problem, you can use the command-line interface (CLI) or the Cluster 
Management Suite (CMS) to identify and solve problems. 

Note

For complete syntax and usage information for the commands used in this chapter, refer to the 
Catalyst 3550 Multilayer Switch Command Reference for this release and the Cisco IOS Command 
Summary for Release 12.1.

This chapter consists of these sections:

•

Using Recovery Procedures, page 27-1

•

Preventing Autonegotiation Mismatches, page 27-10

•

Diagnosing Connectivity Problems, page 27-11

•

Using Debug Commands, page 27-14

•

Using the show forward Command, page 27-15

•

Using the crashinfo File, page 27-17

Using Recovery Procedures

These recovery procedures require that you have physical access to the switch:

•

Recovering from Corrupted Software, page 27-2

•

Recovering from a Lost or Forgotten Password, page 27-3

•

Recovering from a Command Switch Failure, page 27-7

•

Recovering from Lost Member Connectivity, page 27-10

Summary of Contents for Catalyst 3550































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Catalyst 3550

F-SECURE ONLINE BACKUP - HELP Manual preview
ONLINE BACKUP - HELP
Brand: F-SECURE Pages: 20
MACROMEDIA CONTRIBUTE-USING CONTRIBUTE Use Manual preview
CONTRIBUTE-USING CONTRIBUTE
Brand: MACROMEDIA Pages: 214
PS Audio PowerPlay Programming Manual preview
PowerPlay
Brand: PS Audio Pages: 6
National Instruments NI-DNET User Manual preview
NI-DNET
Brand: National Instruments Pages: 86
NEC V850 ZigBee Pro User Manual preview
V850 ZigBee Pro
Brand: NEC Pages: 59
NEC Storage Manager Configuration Setting Tool User'S Manual preview
Storage Manager Configuration Setting
Brand: NEC Pages: 68
NEC SpectraView User Manual preview
SpectraView
Brand: NEC Pages: 68
NEC Storage ReplicationControl SQL Option User Manual preview
Storage ReplicationControl SQL Option
Brand: NEC Pages: 104
NEC Storage Performance Monitor/Optimizer User Manual preview
Storage Performance Monitor/Optimizer
Brand: NEC Pages: 184
NEC Storage Manager IS015-9E User Manual preview
Storage Manager IS015-9E
Brand: NEC Pages: 200
NEC Storage Manager Messages Handbook preview
Storage Manager Messages
Brand: NEC Pages: 499
NEC Storage Manager Messages Handbook preview
Storage Manager
Brand: NEC Pages: 710
Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 5.1 Tuning Manual preview
CLUSTER SUITE FOR ENTERPRISE LINUX 5.1
Brand: Red Hat Pages: 160
AVG ANTI-VIRUS 2011 - REV 2011.07 User Manual preview
ANTI-VIRUS 2011 - REV 2011.07
Brand: AVG Pages: 210
AVG ANTI-VIRUS 2011 - REV 2011.06 User Manual preview
ANTI-VIRUS 2011 - REV 2011.06
Brand: AVG Pages: 210
ION MixMeister EZ Setup & Troubleshooting preview
MixMeister EZ
Brand: ION Pages: 12
Intel Active Management Technology v4.0 Administrator'S Manual preview
Active Management Technology v4.0
Brand: Intel Pages: 143
MACROMEDIA BREEZE-FOR MEETING PRESENTERS Manual preview
BREEZE-FOR MEETING PRESENTERS
Brand: MACROMEDIA Pages: 96

Brands by name

Popular brands

Load more brands